Assembly

Unfold Original Air Large and attach wheels as illustrated. Place at an end of the craft. Use snap buttons to adjust the support arms to the second “click stop” from the top. (Some of the snap button settings are behind the protective end caps. They can be located under the soft vinyl cap by pushing the button in and pulling up the support arm. Repeat on other arm.)

Placing Original Air Large
on Your Boat

Slide Original Air Large over either end of the craft. The Paddleboy® logo should be right side up. If the craft is too deep and Original Air Large will not slide all the way on, remove and set the arms one “stop” higher. The top crossbar should be resting on the gunwales or deck, and the hull should be centered and resting on the padded, bottom crossbar. IMPORTANT: Use the shortest snap button setting possible.

With Original Air Large’s arms resting against the craft’s hull, adjust the relaxed shock cord so that the attachment hook is about 2/3 of the way to the attachment point. Stretch out the shock cord and hook securely on thwart, seat or some other secure part of the craft. NEVER stretch the shock cord more than 2 times its relaxed length. Always grip the shock cord and attachment hook firmly, keeping your face away from cord and hook while stretching.

Back to Original Air Large Specifications