Assembly

Slide crossbar tubes together leaving foam padding on bars. To hold tubes in position, allow snap button to emerge from one of the holes in crossbar. Some holes may be hidden beneath foam padding. Judge which hole to use by the distance between drainage holes in your kayak, if possible. Holes on crossbar and holes in kayak may not align. To release snap button, twist cart frame clockwise. Then slide crossbars to match holes in kayak without use of snap button. Snap button is not necessary to have cart function properly. Slip the foam pad over the joint of the tubes. A little ArmorAll on tubes may help (do not use oil).

Attach wheels as illustrated.

The Scupper Pup is supplied with the 11"- 18" crossbar in place. You may find your boat scupper holes need the shorter crossbar set which is included (6"- 11"). To change crossbars, transfer snap button from long crossbar to shorter one. Manually turn thumb screws holding crossbar to stainless steel T-fitting. DO NOT loosen screws securing T-fitting to upright bars. Slide out long tubes from T-fitting and replace with shorter tubes with snap button inserted. Align thumb screws with holes in crossbars. Tighten thumb screws by hand FIRMLY. Continue assembly as in first step.

Placing Scupper Pup on Your Boat